Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to rot or rust like aluminum or timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is essential to make sure that your windows are in good working order.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the glass to ensure that any shards will fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will stop drafts and water from entering your home until a professional comes out to fix the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the distance between the door and the window is large, you might prefer an alarm system that includes a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in place.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loose their elasticity. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. The majority of the time this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and perform a test to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to take action if you get up double glazed window repairs each morning to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a upvc window repairs simple fix that can be accomplished by any DIYer who has the ability. Depending on how serious the issue is, old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it blows open with an ease. They can be repaired by any DIYer who is skilled and are usually done within a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It's easy to change the hinges on a window but it's much easier if someone else helps you hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to give advice.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should do this once more info a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become misaligned due to wear, causing an opening where the sash meets frame. This can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to have them realigned or replaced. The interlock, which is located on the hinge of the window and can also be misaligned, and again it is possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next most common reason for draughts is window seals. These can become worn down or damaged over time and allow air to here escape through the gaps. Replacement of these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help read more control indoor temperatures and lessen draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them rather than repair them. If you are having issues with your upvc windows, it is best to seek professional assistance as soon as you can.